Follow

arcserve-KB : RO47415 :16.0 UPDATE 5: WIN-BACKUP AND COPY DESTS MIXED UP

Last Update: 2016-04-27 12:25:59 UTC

Solutions Details
Operating System:    WINDOWS Solution No:    8
Confirmed Date:    06/21/2012 Updated Date:    06/21/2012
Component:    ARCSERVE D2D-CAD2D Release:     16.0
Fix:    RO47415 Hyper:    Yes
Distribution Code:    AVAILABLE     

 
Problem Description
Title: WIN-BACKUP AND COPY DESTS MIXED UP
Description:
                      D2D  Backup  destination  and  copy recovery points
  destination could become mixed up under some
  special circumstances, this usually happens when
  both destinations are on USB disk:
 
  1. Set D2D backup destination to USB disk1, Set
  copy recovery points destination to USB disk2
 
  2. Run a few backup jobs to USB disk1, then remove
  USB disk1.
 
  3. Copy a few recovery points to USB disk2.
 
  4. Connect USB disk1 and run a few backup jobs
  again, the backup job may backup data to USB disk2
  instead.
 
  PREINSTALL STEP : NO
 
  POSTINSTALL STEP : NO
 
  USE APPLYPTF TOOL : NO
 
  USE APPLYPTF-64BIT : NO
 
  MASTER IMAGE PATCH : NO
 
  PREREQS: RO45490
 
  MPREREQS: None
 
  COREQS: None
 
  MCOREQS: None
 
  SUPERSEDED: None
 
 HYPER: YES
 
 DISTRIBUTION CODE: A (A=Available, I=Internal)
 
 PROBLEM RESOLUTION: Follow the instructions below:
 The following PREREQS must be applied before applying this fix:
 RO45490
 
 1. This fix requires CA ARCserve D2D r16.0 to be installed.
 2. Unzip the fix file as follows in folder RO47415:
  CAZIPXP -u RO47415.CAZ
 
 3. Stop D2D Webservice
 
 4. Rename AFCoreInterface.dll ,AFCoreFunction.dll, AFBackupDll.dll,
 AFRestoreDll.dll, CatalogMgrDll.dll, AFArchive.exe in X:\Program
 Files\CA\ARCserve D2D\BIN, please add extension "RO47415" to these
 dlls.
 
 5. For x86 bit system, copy AFCoreInterface.dll.x86
 ,AFCoreFunction.dll.x86, AFBackupDll.dll.x86, AFRestoreDll.dll.x86,
 CatalogMgrDll.dll.x86, AFArchive.exe.x86 to X:\Program
 Files\CA\ARCserve D2D\BIN and remove the .x86 extension.
 
 6. For x64 bit system, copy AFCoreInterface.dll.x64
 ,AFCoreFunction.dll.x64, AFBackupDll.dll.x64, AFRestoreDll.dll.x64,
 CatalogMgrDll.dll.x64, AFArchive.exe.x64 to X:\Program
 Files\CA\ARCserve D2D\BIN and remove the .x64 extension.
 
 7. Start D2D WebService
 
 
 
 
 PRODUCT(S) AFFECTED: CA Arcserve D2D Ent Support Release 16.0
 
 DOWNLOAD INFORMATION:
 ---------------------
 http://downloads.arcserve.com/patches/CAD2D/nt/GA/RO47415/RO47415.CAZ
 
 UPDATED ROUTINES:
 ---------------
 AFArchive.exe.x64 209264 TUE JUN 19 17:30:30 2012
 AFBackupDll.dll.x64 1762672 TUE JUN 19 17:30:54 2012
 AFCoreFunction.dll.x64 1212784 TUE JUN 19 17:30:56 2012
 AFCoreInterface.dll.x64 1105264 TUE JUN 19 17:30:56 2012
 AFRestoreDll.dll.x64 303472 TUE JUN 19 17:30:59 2012
 CatalogMgrDll.dll.x64 528240 TUE JUN 19 17:31:10 2012
 AFArchive.exe.x86 198000 TUE JUN 19 17:32:18 2012
 AFBackupDll.dll.x86 1373552 TUE JUN 19 17:32:55 2012
 AFCoreFunction.dll.x86 783728 TUE JUN 19 17:32:56 2012
 AFCoreInterface.dll.x86 730480 TUE JUN 19 17:32:57 2012
 AFRestoreDll.dll.x86 247152 TUE JUN 19 17:33:00 2012
 CatalogMgrDll.dll.x86 451952 TUE JUN 19 17:33:11 2012
 
 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments