Follow

arcserve-KB : RO52754 :16.0 SP1: WIN-RESTORE FAILS ONTAP 8.1.1

Last Update: 2015-08-28 09:40:13 UTC

Solutions Details
Operating System:    WINDOWS Solution No:    2
Confirmed Date:    12/19/2012 Updated Date:    12/19/2012
Component:    ARCSERVE BACKUP WINDOWS NAS OPTION COMMON-AXWNAS Release:     16.0
Fix:    RO52754 Hyper:    No
Distribution Code:    AVAILABLE     
Problem Description
Title: WIN-RESTORE FAILS ONTAP 8.1.1
Description:
                  This update addresses the following scenarios:
 
  Full session restore to alternate location fails
  due to "." placed at the end of the restore
  location path on a OnTap 8.1.1 system.
 
 
  This fix also includes T5E5149
  The following information is taken from EMC
  documentation on FileMover file system backups
  with NDMP:
 
  ***************************************************
  A VNX FileMover-enabled file system, used in
  conjunction with external policy migration
  software, automatically migrates infrequently
  used files to less-expensive secondary storage
  systems.
 
  VNX is the primary data storage system, while the
  secondary system might be another VNX or a
  network file server supporting CIFS or NFS.
 
  When a file migrates to secondary storage, the
  file contents migrate to a file on secondary
  storage and the original file is converted to a
  stub file. The stub file contains all the
  metadata of the file including its actual
  location on secondary storage to ensure that VNX
  can locate and recall the file data as needed.
  ***************************************************
 
  When you back up a FileMover-enabled file system
  by using CA ARCserve Backup NAS option, after
  installing this fix, you'll have the choice of:
 
  1. Backing up only the stub files on primary
  storage. This is the default option. You can also
  add a DWORD registry value bBackupStubFileOnly
  and set it to 1 to specify this option:
  [HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\CA
  ARCServe Backup\NASAgent\Parameters]
  bBackupStubFileOnly=1
 
  2. Backing up file content on the secondary
  storage together with stub files on the primary
  storage. This can be accomplished by adding a
  DWORD registry value bBackupStubFileOnly and
  setting it to 0:
  [HKEY_LOCAL_MACHINE\SOFTWARE\ComputerAssociates\CA
  ARCServe Backup\NASAgent\Parameters]
  bBackupStubFileOnly=0
 
 
 
 
  PREREQS: RO35289
 
  MPREREQS: None
 
  COREQS: None
 
  MCOREQS: None
 
  SUPERSEDED: None
 
 HYPER: NO
 
 DISTRIBUTION CODE: A (A=Available, I=Internal)
 
 PROBLEM RESOLUTION: Follow the instructions below:
 The following PREREQS must be applied before applying this fix:
 RO35289
 
 This fix requires CA ARCserve Backup Release 16.0 SP1 to be installed.
 
 1. Unzip the fix file as follows:
 
 CAZIPXP -U RO52754.CAZ
 
 2. Launch RO52754.exe.
 
 
 
 PRODUCT(S) AFFECTED: CA ARCserve Backup NDMP NAS Option Release 16.0
 
 DOWNLOAD INFORMATION:
 ---------------------
 http://downloads.arcserve.com/patches/AXWBAS/nt/SP1/RO52754/RO52754.CAZ
 
 UPDATED ROUTINES:
 ---------------
 NASAgent4.dll.nas._x64 357232 TUE DEC 04 03:26:06 2012
 NASAgent4.dll.nas._ia64 799088 TUE DEC 04 03:26:06 2012
 NASAgent4.dll.nas._x86 292208 TUE DEC 04 03:26:08 2012
 RO52754.exe 24080656 TUE DEC 04 15:27:49 2012
 
 
 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments